How to Make Shake Shingles for Rustic Siding
Crafting shake shingles by hand offers a traditional, authentic look for wood siding. This guide walks through selecting the right wood, preparing stock, shaping shakes, and readying them for installation. Whether reviving an old cabin or adding warmth to a modern exterior, understanding the process helps ensure durable, attractive results.
What You Need To Make Shake Shingles
The toolkit for hand-split shakes centers on accuracy, safety, and efficiency. Essential items include a froe and mallet for clean splits, a drawknife or adze for smoothing, and a long-handled chopping ax for initial riving. A sharp detail knife helps trim edges. For stock handling, use a saw to cut planks to length and a temporary work bench or sawhorses for stability. Protective gear such as work gloves, safety glasses, and sturdy boots is non-negotiable. A moisture meter helps track wood dryness, which is critical for long-term performance.
Material choice matters. Cedar is favored for its natural rot resistance and aroma, though redwood or yellow pine can work in some regions. Aim for straight-grained stock with minimal knots; shake shingles perform best when the wood is slowly seasoned. Plan for a uniform thickness, typically around 3/8 inch to 1/2 inch, to balance appearance with sealing efficiency. For a traditional look, consider randomly varying widths and thicknesses to mimic authentic shake textures.
Selecting Wood And Preparing Stock
Stock preparation begins with selecting straight lengths of lumber free from heavy defects. Cut logs into sections that maximize the number of usable shakes and allow for eventual trimming. Rinse or brush away dirt, then air-dry the pieces in a shaded, well-ventilated area. Avoid direct sun exposure during drying to reduce surface cracking. Wood should reach an interior moisture content of roughly 12% to 15% before shaping, which minimizes warping after installation.
Initial shaping involves riving the wood into manageable billets. Use a froe to score a clean break along the grain, then strike to split. Aim for rectangular billets that are easy to handle and align with your planned shake dimensions. As you split, remove any resin pockets or loose fibers that could cause uneven edges. Depending on local climate and wood type, you may need several weeks of air-seasoning or a controlled-drying setup to reach the target moisture level.
Shaping And Splitting Shake Shingles
Shaping shakes requires steady technique and consistent rhythm. After breaking the billet with a froe, use a broad-bladed knife or drawknife to pare the face and edges to produce a flat, uniform surface. The goal is to remove rough bark, stray fibers, and warp-prone surfaces while preserving a slightly tapering profile that helps shed water. For traditional hand-cut shakes, thickness varies along each piece to create a rustic texture, though many builders prefer uniform thickness for ease of installation.
Width variation is a hallmark of shake shingles. Plan for widths ranging from 4 to 6 inches for a typical project, with occasional wider or narrower pieces to mimic natural variation. Use a saw or miter box to cut lengths that will overlap properly during installation. Edges should be beveled slightly to promote drainage and reduce moisture retention at joints. Always maintain control over the piece to prevent splits from propagating past the intended edge.
Drying And Curing Shake Shingles
Drying shakes after shaping helps stabilize the wood and minimizes future movement. Stack shingles with spacers to allow air to circulate around each piece. Place the stack on a level, elevated surface to prevent ground moisture transfer. Turn shingles periodically to ensure even drying on all faces. Monitor light cracks or checks; minor checks may be acceptable in rustic applications, but deep checks can compromise weather resistance and aesthetic quality.
Seasoning duration depends on climate, wood species, and initial moisture content. In temperate regions, air-drying for several months is common before installation. In wetter climates or when using denser woods, longer curing may be necessary. A moisture meter helps confirm a safe range for installation, typically around 12% to 15% moisture content for most wood species used in shake shingles. Once properly dried, store shingles off the ground and away from direct moisture to preserve their integrity.
Installing Shake Shingles: Basic Principles
Although this article emphasizes making shakes, understanding installation is essential for a successful project. Begin with a solid, weatherproof backer or underlayment and a properly prepared roof deck. Install starter courses with a uniform overhang that directs water away from the wall. Shakes should be lapped to shed moisture and prevent wind-driven leaks. Use corrosion-resistant nails or fasteners, placed to avoid splitting the wood. Fastening patterns vary, but a consistent stagger is crucial to minimize visible seams.
When cutting shakes to fit edges, maintain clean, straight cuts to avoid delamination. Use a saw or knife to trim pieces for clean transitions at corners, vents, and chimneys. Regularly check alignment and spacing as you progress. Visual rhythm is important; the goal is a balanced, natural look while ensuring robust rain protection. For exposed locations, consider additional sealant or flashing at major joints to improve longevity.
Maintenance And Longevity
Shake shingles demand periodic upkeep to maximize life span. Inspect for loose, cracked, or warped pieces after severe weather and re-nail as needed. Clean surfaces with a soft brush and non-bleach cleaner to remove dirt and mildew, avoiding pressure washing that can damage the wood. Re-stain or reseal every few years, depending on climate and exposure; UV light and moisture are primary aging factors. In areas with heavy rainfall or humidity, more frequent maintenance may be required to preserve color and water-shedding capabilities.
To extend life, ensure proper ventilation under the shingles and avoid trapping moisture behind the siding. Consider upgrading flashing around doors, windows, and rooflines to reduce water infiltration. If damage is extensive, replacing individual shakes rather than entire sections can be cost-effective and preserves the overall character of the surface. Regular inspections in spring and fall help catch issues before they escalate.
Tips For A Successful DIY Shake Shingle Project
- Practice on scrap stock before shaping finished pieces to refine your technique.
- Keep tools sharp; a dull froe can cause ragged splits and wasted material.
- Work in a dry environment to minimize warping during shaping and drying.
- Track moisture levels closely; improper seasoning undermines durability.
- Document dimensions and patterns for consistent reinstallation if replacements are needed.